Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 80 items
Grip (Square Type) FG・FGM Series
It can be used for a wide range of applications, not only as a handle or grip but also as covers for levers and gears, and at the ends of cables. ● There are two types: round end and flat end. ● You can also choose the color. ● Made in the USA (with some production starting in Japan).
E20000 has been newly added! Dynamic fatigue testing machine that adopts linear motor technology, eliminating the need for hydraulic oil, energy-saving, and low noise.
"ElectroPuls" is an electric fatigue testing machine that utilizes linear motor technology (patented) based on approximately 13 years of testing experience. It features a wide performance range capable of conducting static, dynamic, and fatigue tests, making it an ideal system for various laboratories and testing facilities. It can also be used for testing biomaterials and medical devices. In addition to a variety of testing accessories, the new "E20000" can perform both dynamic and static tests with a single unit. Depending on the application, we offer a lineup of uniaxial systems up to 10kN and 100Nm, as well as linear/torsion (biaxial) options. There are three sizes available for selection based on your needs. Our product meets your testing requirements in a simpler, smarter, and safer way. 【Features】 ■ No hydraulic oil required ■ Energy-efficient ■ Low noise ■ Space-saving ■ No complex and costly maintenance required 【Software Used】 WaveMatrix2 *For more details, please refer to the PDF materials or feel free to contact us.
Designed to allow for the pre-determination of specimen length! Enables quick and convenient load application.
The "2715-001 Series" is a capstan-type tensile grip designed to test twisted cords or braided cords more quickly and easily. The guide groove for the test specimen wraps around the capstan for 2.5 turns, allowing for two wraps to distribute the test specimen load and stress concentration. When a load is applied to the test specimen, the grip has a self-tightening structure. A flat type of capstan face is available separately. 【Features】 ■ Load capacity: 2.5kN (250kgf) ■ Quickly and easily attach test specimens ■ Minimize chuck breakage of test specimens ■ Pre-determination of test specimen length is possible *For more details, please refer to the PDF document or feel free to contact us.
Extensive grip/jig usage is possible! It enables easy and error-free operation.
The "2580 Series Static Load Cell" is designed for use with the 5900 testing system, providing excellent performance with the ability to measure loads at 1/1000 of the load capacity with an accuracy of 0.5% of the reading. With automatic recognition and automatic calibration features, this series of load cells is easy to operate, can withstand loads up to 150% of the load capacity without damage, and does not experience mechanical failure even under loads of up to 300%. All Instron load cells are individually temperature compensated and undergo accuracy and reproducibility testing with traceable calibration instruments according to international standards, resulting in measurement uncertainty being less than 1/3 of the load cell's allowable error. 【Features】 ■ Load capacity: ±500 N to ±600 kN (50 to 60,000 kgf) ■ Suitable for a wide range of test types (including tension, compression, single and double swing repeated stress, etc.) ■ Overload capacity of 150% of load capacity - reduces the risk of damage ■ Fixture weight of 10% of load capacity - allows for extensive use of grips/fixtures *For more details, please refer to the PDF materials or feel free to contact us.
Easily attachable to any testing machine in the laboratory! Complies with a wide range of international testing standards such as ASTM D3039.
"AVE2" is a high-precision non-contact strain measurement device that employs patented measurement technology and is a non-contact video extensometer. It is a fully integrated system that adapts to the environmental conditions in the testing room and easily fits various testing machines, dramatically eliminating errors caused by thermal fluctuations and changes in light that commonly occur in the laboratory. It can be used at room temperature, high/low temperatures, or while measuring specimens or components submerged in a liquid tank. 【Features】 ■ Usable for testing under various environmental conditions and advanced strain measurement using Digital Image Correlation (DIC) ■ Adaptable to a wide range of applications ■ Optional advanced features ■ Easily attachable to any testing machine in the laboratory ■ A robust solution with potential for future expansion *For more details, please refer to the PDF materials or feel free to contact us.
Dynamic linear load capacity ±3000N / dynamic torque capacity ±25Nm! The required desk space for the frame is less than 0.3m².
The "E3000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring a linear-torsion type design. Equipped with advanced digital control electronics, dual-axis Dynacell load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on a single-phase power supply and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Separate linear/rotary actuators ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating above 100Hz ■ Dynamic linear load capacity: ±3000 N / Dynamic torque capacity: ±25 Nm *For more details, please refer to the PDF document or feel free to contact us.
Dynamic linear load capacity ±3000N / static load capacity ±2100N! The required desk space for the frame is less than 0.3, making it compact.
The "ElectroPuls E3000" is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components. It operates on a single-phase power supply and does not require additional utilities (such as compressed air, hydraulic pressure, or cooling water supply) for basic machine operation. Equipped with advanced digital control electronics, DynacellT load cells, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. 【Features】 ■ Oil-free linear motor technology that maintains a clean state ■ Unlockable to allow for rotational freedom of the actuator, providing flexibility in testing ■ Designed for dynamic and static testing of diverse materials and components ■ High dynamic performance, capable of operating at over 100Hz ■ Temperature-controlled air cooling mechanism *For more details, please refer to the PDF materials or feel free to contact us.
Dynamic linear load capacity ±10kN / dynamic torque capacity ±100Nm! The required floor space for the frame is less than 0.8m².
The E10000 is a state-of-the-art dynamic fatigue testing machine designed for dynamic and static testing of a wide range of materials and components, featuring linear-torsion type technology. It is equipped with advanced digital control electronics from Instron, a Dynacell load cell for biaxial testing, console software, and a new testing technique based on the rigidity of the test specimen for hassle-free tuning, an electric crosshead lift, a T-slot table that can be flexibly configured for testing, and many other user-oriented features. It operates on single-phase power and does not require additional utilities (such as pneumatic, hydraulic, or cooling water supply) for basic testing machine operations. **Features** - Oil-free linear motor technology that maintains a clean state - Separate linear/rotary actuators - Designed for dynamic and static testing of diverse materials and components - High dynamic performance, capable of operating at up to 100Hz - Operable on single-phase main power, no hydraulic or pneumatic sources required *For more details, please refer to the PDF document or feel free to contact us.*
Introducing application examples of material testing for implant products.
Instron's instruments and technology are used for various tests across a wide range of medical fields. Implant devices come in many types, including cardiovascular stent placement, endovascular stent placement, and neurovascular stent placement, as well as ocular implants such as intraocular lenses and contact lenses. Tensile testing of Nitinol wire in accordance with "ASTM F2516," which employs non-contact strain measurement, helps clarify the performance characteristics of many implant devices. 【Features】 ■ Easy operation ■ Reliability ■ FDA compliance ■ Space-saving design *For more details, please refer to the PDF materials or feel free to contact us.
Ensure the distance between reference points during specimen installation! Easy specimen installation to enhance productivity.
The "2716-00x / 2736-00x series" is a manually operated wedge grip designed for easy attachment, alignment, and positioning of test specimens. After the test specimen is attached, the gripping force increases as the test load increases. The structure of the grip body allows for movement, which effectively eliminates any initial load during the attachment of the test specimen. It prevents slipping of the test specimen and is particularly suitable for testing high-strength materials such as metals and composites. 【Features】 ■ Available in 100kN (10,000kgf) and 150kN (15,000kgf) options ■ Quick attachment and detachment of test specimens ■ Easy attachment of test specimens to enhance productivity ■ Self-tightening wedge structure prevents slipping of the test specimen ■ Interchangeable faces accommodate a wide range of test specimen shapes and types *For more details, please refer to the PDF document or feel free to contact us.
4-point bending conversion kit available! Mini bending jig adjustable for spans from 5mm to 105mm.
The "2810 Series" is a stainless steel mini bending jig. It features a micrometer for adjusting the position of the test specimen and a positioning function that allows for the adjustment of the axis center. A four-point bending kit with adjustable span is also available. Although it is designed for testing electronic components, it can also be used for bending tests and deflection tests of other materials and components. 【Features】 ■ Accurate specimen mounting with a micrometer ■ Specimen stopper for optimal alignment ■ Complies with quasi-standard G69-0996 ■ 2kN capacity ■ Temperature range: -75°C to 300°C *For more details, please refer to the PDF document or feel free to contact us.
A sturdy design that requires minimal maintenance! Complies with many standards such as ISO, ASTM, and DIN!
The "2810 Series" is a fixture that can perform various bending and fracture toughness adhesive tests, including the measurement of bending elastic modulus, bending strength, and bending yield strength. It is possible to change to a four-point bending setup with an optional conversion kit. It includes one upper loading pin with a diameter of 25mm and two lower loading pins with a diameter of 10mm. The deflection of the test specimen can be measured through crosshead displacement or, for more accurate measurements, by using a strain gauge extensometer. 【Features】 ■ Load capacity: 100kN (10,000kgf) ■ Four-point bending conversion kit (optional) ■ Complies with many standards such as ISO, ASTM, and DIN ■ Adjustable span distance to accommodate a wide range of specimen sizes ■ Freely rotating rollers *For more details, please refer to the PDF materials or feel free to contact us.
We offer a variety of face types in different sizes and surface qualities! Achieving reliability and low maintenance costs!
The "2712-04x series" is a pneumatic-operated grip equipped with various features to enhance gripping pressure, ease of use, operator safety, and productivity. It provides versatile grip solutions for a wide range of materials. The gripping pressure can be controlled by adjusting the incoming air pressure, and it remains constant even if the thickness of the test piece varies significantly during testing. The grip is attached to the system with a simple clevis pin, and the ergonomically designed lock nut eliminates backlash with hand tightening. 【Features】 ■ Capacity: 1kN, 2kN, 5kN, 10kN ■ Sturdy design ■ Quick face replacement without the need for tools or pins ■ Sealed design prevents dust and debris from entering ■ Large opening accommodates thick test pieces *For more details, please refer to the PDF document or feel free to contact us.
By adopting optional accessories, we achieve improved productivity, ease of use, and reproducibility!
The "2712-05x series" is a versatile pneumatic-operated grip that can accommodate a wide range of materials and applications. The gripping pressure is controlled by adjusting the pressure of the compressed air, allowing it to respond to changes in the thickness of the test specimen during testing. The ease of use and user-friendly operation of this grip improve the operator's usability and productivity compared to other gripping methods. The internal pneumatic cylinder of the grip operates two lever arms simultaneously to close the faces, centering the test specimen in the middle of the faces. **Features** - Capacity: 50N, 250N - Sturdy design - Self-centering function of the test specimen due to simultaneous operation of the faces - Quick exchangeable faces without the use of tools or pins - Built-in movable mechanism to prevent dust and debris from adhering to the test specimen *For more details, please refer to the PDF document or feel free to contact us.*
Reduce operator injuries! Generate results while improving the efficiency of the laboratory!
The "AT2XY Stage" is an automatic XY testing system suitable for testing medical products, syringes, small electronic devices, keypads, and pharmaceutical tablets. It tests multiple specimens without the intervention of an operator. This reduces testing time and allows for quicker provision of the data necessary for product development and production. It is designed to repeatedly conduct the same tests, such as compression, tensile, and bending tests on devices and electronic equipment. 【Features】 ■ Increased testing processing capacity ■ Effective use of operator time ■ Improved repeatability ■ Enhanced safety and ergonomics *For more details, please refer to the PDF materials or feel free to contact us.
Significantly improved reproducibility and precision of important test results! It is possible to increase the processing speed of material testing.
The "AutoX750" is an automatic contact extensometer used to obtain various calculation results, including elastic modulus, offset yield point, plastic elongation at fracture (non-proportional), and the r-value and n-value of sheet metal. It can be used with various materials, including metals, plastics, and composites, with high precision and large displacement at room temperature and outside of room temperature. It can be used with a fully automated testing system or a manual testing system, and when not in use, it features a mounting method that allows the operator to move the extensometer outside the testing area, ensuring it can be safely stored in a secure location. 【Features】 ■ Automatic gauge length setting ■ Extremely high resolution and accuracy ■ Large displacement ■ Complete integration with Instron's software ■ Compliance with ISO 9513, ASTM E83, and ISO 527-1: 2011 requirements *For more details, please refer to the PDF materials or feel free to contact us.
Supports clamp displacement up to 10 inches! Designed with a pair of weight-balanced specimen clamps.
The "2603-080/084/085/086" is a precision device for measuring strain in highly extensible materials such as elastomers, semi-cured plastics, and films. It is designed for quick and easy direct attachment to test specimens. The gauge length can be adjusted in increments ranging from 0.5 inches to 5 inches or from 10mm to 200mm. The upper and lower specimen clamps are counterbalanced separately to ensure that the weight of the clamps does not affect the specimen, and they are mounted on a polished shaft equipped with linear bearings. 【Features】 ■ Quick release clamp ■ Counterbalance for minimal load on the specimen ■ Adjustable gauge length settings ■ Adjustable clamp pressure to accommodate various specimen thicknesses ■ Easily attachable to most Instron testing machines *For more details, please refer to the PDF document or feel free to contact us.
Maximum load capacity of 250 kN! Adjustable span distance compatible with a wide range of specimen sizes!
This product is a bending fixture capable of conducting various bending and fracture toughness bending tests, including the measurement of bending elastic modulus, bending strength, and bending yield strength. The easy-to-install three-point bending fixture can be converted to a four-point bending setup with an optional conversion kit. The fixture includes one upper pressure pad with a diameter of 100mm and two lower pressure pads with a diameter of 50mm, which can be adjusted to accommodate test specimens of various spans. 【Features】 ■ Maximum load capacity of 250kN ■ Complies with many standards including ISO, ASTM, and DIN ■ Adjustable span distance to accommodate a wide range of specimen sizes ■ Freely rotating rollers ■ Interchangeable rollers and diameters to accommodate various specimen types *For more details, please refer to the PDF document or feel free to contact us.
The 3-point bending jig can be converted to a 4-point bending jig with an optional conversion kit!
The "2810 Series" is a bending fixture that can perform various bending tests, such as measuring bending elastic modulus, bending strength, and bending yield strength. The fixture includes one upper pressure pad with a diameter of 10mm and two lower pressure pads that can be adjusted to accommodate test specimens with various spans, available in diameters of 4mm or 10mm. The deflection of the test specimen can be measured directly at the center with greater accuracy using either crosshead displacement or a deflection gauge plunger, along with a strain gauge extensometer. 【Features】 ■ Load capacity of 5kN ■ Optional conversion kit for four-point bending ■ Complies with many standards such as ISO, ASTM, and DIN ■ Accommodates a wide range of specimen sizes with fully adjustable span distances ■ Specimen stopper capable of handling specimen widths up to 50mm ■ Deflection gauge plunger option available ■ Temperature range: -100 to +350℃ *For more details, please refer to the PDF document or feel free to contact us.
Comprehensive verification across a wide range of load conditions! We have a proven track record of reliably applying our technical skills and quality on-site.
Our calibration services not only meet the standards of the industry and international related regulations but also aim to maintain precision beyond those standards. As a company specializing in high-precision testing machines and a manufacturer of material testing machines utilizing strain gauge load cell technology, Instron provides calibration with world-class accuracy. Instron's accredited calibration covers a wide range of load verification, allowing for the validation of both lower and higher load testing systems without the need for changes to the transducer or the purchase of new equipment. **Features** - Calibration is performed by calibration laboratories worldwide following ISO standards or ASTM calibration standards. - Maintains one of the largest commercial dead weight (actual load force standards) in North America, establishing traceability to the National Institute of Standards and Technology (NIST) in the United States. - With a primary load standard capability of 130,000 lbf, Instron has the ability to calibrate with the highest level of accuracy and the lowest measurement uncertainty. *For more details, please refer to the PDF document or feel free to contact us.*
We offer transducer calibration services along with IQ/OQ validation packages!
In medical device and pharmaceutical companies, software validation is essential to comply with FDA 21 CFR Part 820 and ISO 13485. To support IQ/OQ software validation, our services have long provided on-site IQ/OQ validation and documentation services. This service, offered by the equipment manufacturer, is designed to ensure that our testing equipment meets specifications and can generate valid results. 【Features】 ■ Installation Qualification (IQ) - Installation checklist ■ Operational Qualification (OQ) - Transducer validation - Software functionality check - Calculation validation *For more details, please refer to the PDF document or feel free to contact us.
Compliant with the requirements of major international standards! Designed compactly for the purpose of easy and rapid specimen preparation.
Creating test specimens properly is an extremely important process for accurate material characterization. Adopting appropriate notch processing methods and accurately creating test specimens generate high reliability in the performance of the finished product and influence the final test results. This is made possible by using multiple specimen preparation techniques. Instron offers products such as notch processing machines and punching machines. These are designed to create test specimens from thin samples to thick samples, as well as from soft plastics to hard plastic materials and reinforced plastic materials, in compliance with the requirements of major international standards. 【Features】 ■ Compact design aimed at simple and rapid specimen creation ■ Manual and automatic models allow for the creation of test specimens in various sizes and shapes for a wide range of plastic testing applications ■ Provides testing methods that enable high levels of result repeatability and reduced working time *For more details, please refer to the PDF document or feel free to contact us.
Fewer settings, more tests! Do you have assurance that accurate test data is being obtained?
"Rigid Base Tuning" is available on all Instron systems equipped with the powerful 8800MT controller. All that is needed is a simple stiffness measurement within the elastic limit of the specimen to measure its rigidity. Using a patented algorithm, this rigidity is utilized to calculate the appropriate control gain in just a few seconds. There is no time-consuming tuning process, complexity is reduced, and it prevents damage to the specimen before the test begins. 【Features】 ■ Simplified process ■ No pre-testing required ■ More accessible ■ Improved accuracy of test data *For more details, please refer to the PDF materials or feel free to contact us.
Built-in 8800 digital controller! Equipped with a two-column load frame that has high rigidity and high-precision alignment.
The features of the electromechanical fatigue testing machine '8862' include a uniaxial electromechanical actuator developed for low-speed static testing, low strain rate testing, and quasi-dynamic cycle testing. These systems are equipped with a two-column load frame that has high rigidity and high precision alignment to achieve outstanding testing performance. The testing space can be configured to meet the requirements of the intended application. Additionally, this product, which has a large capacity, can be equipped with an actuator on the lower table or upper crosshead for greater usability, and a hydraulic lifting device can be incorporated as an option. 【Features】 ■ Built-in 8800 digital controller ■ High-precision load cell ■ Capable of testing speeds down to a minimum of 1 micron per hour ■ Excellent waveform fidelity ■ Low noise *For more details, please refer to the related links or feel free to contact us.
Complete system integration with the Instron electric control system! It can comply with international standards.
The "Thermal Fatigue (TMF) Testing System" is an improved hydraulic servo fatigue testing frame model 8801 that allows for easy analysis of thermal and mechanical load cycles of high-performance materials. Instron offers hydraulic servo or proprietary electric servo actuators tailored to your application, integrated with specially designed components and accessories. By expertly combining a wide range of technologies, a reliable testing machine is achieved, enabling improved data accuracy, enhanced reproducibility, and advanced testing capabilities, compliant with international standards. 【Features】 ■ High-capacity load frame maximizes lateral and axial stiffness during reverse stress testing ■ High-stiffness testing machine with load capacities of ±100kN (±22kip) or ±250kN (±56kip) ■ Induction heating capable of heating test specimens at rates up to 50℃/s ■ Actuator mounted on the lower base with high-precision alignment load string ■ Standard hydraulic servo actuators offer flexible expandability ■ Selection of hydraulic environment settings and dynamic performance according to application *For more details, please refer to the related links or feel free to contact us.
A high-capacity fatigue testing machine has just been launched by Instron! In addition to a variety of testing accessories, it can perform both dynamic and static tests with a single unit.
The "ElectroPuls E20000" is a testing machine with a dynamic linear capacity of 20kN, newly added to the ElectroPuls series. It incorporates Instron's advanced digital control electronics, Dynacell load cells, and a simple tuning technology based on the rigidity of the test specimen. With the automatic electric crosshead clamp, the adjustment of the test space size can be done quickly and easily. 【Features】 ■ Utilizes linear motor technology ■ Supports maximum load capacity of 20kN in the ElectroPuls series ■ Automatic electric crosshead lift and clamp ■ Easy setup with intuitive software (WaveMatrix2) ■ Rigidity-based tuning ■ Quiet operation ■ Oil-free design ■ Compact footprint *For more details, please refer to the PDF document or feel free to contact us.
This is a testing machine with a newly added 20 kN dynamic linear capacity and a torque capacity of 130 Nm in the ElectroPuls series.
The electric-driven testing machine 'E20000 Linear Torsion' has double the linear capacity of the conventional E10000 system, while the overall size of the testing machine remains almost the same. With the latest patented automatic electric crosshead clamp, the adjustment of the test space size can be done quickly and easily. Like existing products, it employs Instron's advanced digital control electronics, dual-axis Dynacell(TM) load cells, and a patented simple tuning technology based on the rigidity of the test specimen. 【Performance】 ■ Linear dynamic load capacity: 20 kN (4,500 lbf) ■ Torsional dynamic load capacity: 130 Nm (1150 in-lb) ■ Stroke: 75 mm (2.95 in) ■ Optical encoder: Accurate digital extension/rotation (5 nm resolution) ■ High dynamic performance: Up to 100 Hz *For more details, please download the PDF or contact us.
Equipped with an automatic stop function! Advanced linear motor design with built-in digital control and position measurement!
The "FT3000" is a linear drive-type durability and fatigue testing machine that has the capability to measure both "fatigue due to stretching" and "cracking due to bending." It is designed for continuous research and development as well as quality control, allowing for the simultaneous measurement of 16 samples under a precisely controlled temperature environment. Frequency, grip distance, and dynamic stroke can be freely set. 【Features】 ■ Achieves both stretching fatigue and bending fatigue (De-Mattia) testing with a single machine ■ Can accommodate a total of 16 samples on a stainless steel grip for simultaneous measurement ■ Measurement in a highly accurate temperature environment ■ Utilizes a digital control panel ■ Adjustable cycle settings *For more details, please refer to the related links or feel free to contact us.
Measures against strong winds and prevention of wire damage during line suspension! A grip to secure OPGW and wires to the pole.
Fujii Electric's "Belt Grip" is a tool for securing OPGW and electrical wires to a tensioning car. It is effective in preventing damage to electrical wires caused by strong winds during line suspension and repeated movement on the tensioning car. There are two types in the lineup, allowing you to choose according to your usage situation. 【Features】 ■ Secures OPGW and electrical wires to the tensioning car ■ Measures against strong winds during line suspension ■ Prevents damage to electrical wires caused by repeated movement on the tensioning car ■ Lineup that can be selected according to usage situation *For more details, please refer to the PDF document or feel free to contact us.
